banner



How To Clean Glass Windows Effectively

Window Washing Tips and Techniques

The fastest way to wash your windows with crystal clear, streak-gratis results.

1 / xi

FH03APR_WASHWN_04 Family Handyman

Bones Window Washing Equipment

2 / 11

FH03APR_WASHWN_02 Family Handyman

DIY Window Cleaning Solution

The all-time homemade window cleaning solution is to just mix two gallons of water and about a teaspoon of dishwashing liquid together in your bucket. Some people too opt to employ vinegar and h2o to clean windows.

In warm weather condition, you'll get a petty more working time by using cool water. If you've procrastinated so long that you're washing windows in below-freezing temps, add windshield washing solution until the h2o doesn't freeze on the drinking glass.

3 / 11

FH03APR_WASHWN_03 Family Handyman

Scrub the Glass

The beginning footstep in the outside window cleaning process is to scrub the glass, working at all angles to make clean the edges. Make certain to encompass every foursquare inch of the drinking glass. This technique allows you to get great results immediately. We're moving the squeegee horizontally beyond the glass, but vertical strokes volition work too. If you lot work vertically, angle the squeegee to directly excess h2o toward the uncleaned area.

iv / 11

FH03APR_WASHWN_05 Family Handyman

Clean a Starting Strip

Tip the duster so that only the corner contacts the drinking glass. Then, starting at the top corner of the glass, clean a narrow strip of glass from top to bottom on ane side. This clean strip makes information technology easier to start the horizontal stokes.

5 / 11

FH03APR_WASHWN_07 Family Handyman

Squeegee Across the Top

Press the duster bract confronting the glass in the upper corner and pull information technology steadily across the window. Concentrate on keeping the top of the squeegee in contact with the height edge of the window.

6 / 11

FH03APR_WASHWN_08 Family Handyman

Wipe the Squeegee Make clean

Wipe the blade on the clean towel in your forepart pocket or wipe it across the scrubber to remove dirt and excess water.

7 / 11

FH03APR_WASHWN_09 Family Handyman

Work Downwardly the Window

Begin once again, with the peak of the squeegee overlapping the previous stroke about 2-in. Pull the squeegee beyond the window at an angle to direct excess water down. Wipe and repeat.

viii / 11

FH03APR_WASHWN_10 Family Handyman

Wipe Off Excess Water

The next stride in exterior window cleaning is to use the rag in your pocket to wipe upwardly backlog water along the bottom edge of the window. Then poke your finger into a dry spot on a separate lint-costless rag and run information technology around the perimeter of the window to remove any remaining suds. Wipe off whatever streaks using a clean expanse of the lint-gratuitous rag. Change rags when y'all tin can't find any fresh, make clean areas.

9 / xi

FH03APR_WASHWN_11 Family Handyman

You lot Tin can Utilize a Squeegee Inside the Firm, Too!

Pro cleaners use squeegees inside all the time, fifty-fifty in houses with stained and varnished woodwork. When cleaning windows with a squeegee indoors, the key is to squeeze virtually of the soapy h2o out of the scrubber to eliminate excessive dripping and running. So rest the scrubber on the edge of the bucket rather than dropping information technology in the water after each window. Depending on how dirty your windows are, yous may exist able to launder v or 10 windows before rinsing the scrubber.

Keep a rag in your pocket to wipe the squeegee and apace clean up soapy water that runs onto the woodwork. Use a separate clean rag to wipe the perimeter of the glass. Microfiber rags also work bully for window cleaning.

ten / 11

FH03APR_WASHWN_18 Family Handyman

Changing a Duster Blade

  • Remove the worn out blade.
  • Catch the end of the bract and stretch it out to expose the metal clip.
  • Slide the clip off, then slide the bract out the opposite end.
    • Pro tip: Blades without clips are usually held together by a couple of screws and the clamp on the handle.
  • Install the new bract.
  • Slide it into the metal channel.
  • Stretch it and reinstall the metal clip.
    • Pro tip: If necessary, cut the finish of the blade to leave i/8 to iii/16 in. protruding from the channel.

FH03APR_WASHWN_19 Family Handyman

11 / 11

FH03APR_WASHWN_17 Family unit Handyman

Tips for Hard-to-Clean Windows

Remove paint specks and labels with a razor bract mounted in a holder. Ever apply a new blade to avoid scratching the glass. Moisture the window showtime and button the blade across one time. Rinse the blade and repeat on the next section to avoid trapping debris under the bract that could scratch the glass. Don't utilise a razor blade on tempered glass.

  • Remove tree pitch or bug droppings with a fine (white) nylon scrub pad. Wet the glass kickoff and rub in an inconspicuous expanse to make sure y'all're not scratching the glass.
  • Make clean tough glass stains and built-up mineral deposits from shower doors and other glass surfaces using mild household abrasives and an ordinary power drill.
  • Utilise this glass cleaning solution for tough spots: Add ane/2 cup of ammonia per gallon of water to help remove greasy dirt for a DIY window cleaner
  • Loosen sticky residue left from labels or tape by soaking it with a specialty product like Goof Off. You'll find Goof Off in the paint department at hardware stores and home centers. Then scrape off the residue with a razor blade.

Source: https://www.familyhandyman.com/list/how-to-wash-windows/

Posted by: henryafelf2002.blogspot.com

0 Response to "How To Clean Glass Windows Effectively"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel